62 - Based upon the information in the indicated area of this Operating System Performance Monitor screen (ST06), what does the Load Average value express?
Click on the button next to the right answer.
A. It is a metric that depends on the percentage of the CPU, I/O and LAN resources being utilized.
B. The 1, 5, and 15 minute averages of the count of processes in the run queue of the operating system.
C. The load average value shows the 1, 5, 15 minute averages of the system swapping activity.
D. The load average value shows the 1, 5, 15 minute averages of the operating system uptime.
63 - Which of the following statements describes the average response time as indicated in this Workload Analysis screen?
Click on the button next to the right answer.
A. Average response time is equal to or less than the sum of CPU time, plus wait time, plus load time, plus database request time.
B. Average response time is equal to or less than the CPU time.
C. Average response time is equal to the sum of CPU time, plus wait time, plus load time, plus database request time, plus time in the frontend process.
64 - Based upon the information in the indicated area of the Workload Analysis screen, which of the following statements is true about Average Wait Time?
Click on the button next to the right answer.
A. Average Wait Time is normally 80% of the average response time.
B. Average Wait Time is normally 50% of the average response time.
C. Average Wait Time is normally less than 5% of the average response time.
65 - This Workload Analysis screen shows an example of poor response time caused from a high average wait time. Which of the following statements explains why the average wait time could be so high?
Click on the button next to the right answer.
A. R/3 programs are waiting a long time to get free workprocesses because system resources are limited.
B. R/3 programs are staying a long time inside of workprocesses because they are waiting for internal R/3 System events.
C. R/3 programs are waiting a long time to get free workprocesses because the R/3 programs are running with low priorities.
66 - Based upon the information indicated in area 1 and 2 of this Operating System Monitor screen, which of the following is true?
Click on the button next to the right answer.
A. System CPU resources are not sufficient. A wait situation is possible when many processes are requesting CPU resources.
B. CPU resources are adequate. No performance problems will be encountered.
C. CPU resources are adequate, but performance problems will be encountered because of wait situations sharing the resources.
67 - Based upon the information in areas 1 - 3 of this R/3 System Monitoring screen, which of the following statements is true?
Click on the button next to the right answer.
A. The "load" program consumes much of the available CPU resources.
B. The "load" program consumes much of the available I/O resources.
C. The "load" program cannot be considered a performance degradation factor.
68 - This performance Analysis screen shows a case of excessive object swapping even though there is apparently enough free space in the Program Buffer.
Based upon the information indicated, which of the following statements explains why there is so much swapping?
Click on the button next to the right answer.
A. The indication of object swapping is false and does not express the current situation.
B. There is enough free space but not enough directory entries.
C. The available free space is fragmented and the fragments are not big enough to hold the new programs.
69 - Which of the following is NOT true of the SAProuter?
Click on the button next to the right answer.
A. The SAProuter is an application level gateway.
B. The SAProuter acts as a secure gateway into and out of a customer's SAP environment.
C. SAProuter will only accept incoming data if it conforms to SAP's own internal protocol and if it is coming in over a predefined port number from a predefined internet address.
D. SAProuter installation is mandatory for connection to the SAP Online Service System (OSS).
E. SAProuter installation is not mandatory for connection to the SAP Online Service System (OSS).
70 - For complete network security, SAProuter must be installed together with:
Click on the button next to the right answer.
A. Microsoft Windows NT
B. UNIX
C. A hardware router.
D. SAProuter offers complete network security without additional hardware investment.
E. A Worldwide Web implementation strategy.
71 - Name the R/3 System transaction used for printing and spool administration.
Click on the button next to the right answer.
A. SM50
B. SM51
C. SPAD
D. SP01
E. SM37
72 - Printing in the R/3 System is handled by the TemSe (storage for Temporary Sequential data) and spool components. Which of the following is NOT true:
Click on the button next to the right answer.
A. The TemSe only stores the output request data.
B. The instance parameter, rspo/store_location, determines whether TemSe data is stored in the database or in an operating system file.
C. TemSe data stored in an operating system file must be backed-up separately from the database data.
D. TemSe data stored in the database can be accessed faster by the host operating system spooler than when it is stored in a file.
E. TemSe data stored in the database is backed-up when regular database backups are done.
73 - Which of the R/3 spool device authorization templates schould be used for creating an authorization profile with a defined set of spool output devices?
Click on the button next to the right answer.
A. S_SPO_DEV_CUST
B. S_SCRP_TALL
C. S_SPO_DEV_AL
D. S_SPO_ACT
E. S_SPO_ALL
74 - Which of the following does NOT apply to time-critical printing?
Click on the button next to the right answer.
A. Use dedicated application servers with their own spool work process.
B. Print as much as possible over a remote connection.
C. Limit device authorization for critical printer to selected users.
D. Implement high availability practices for the host spool system.
E. Use an appropriate naming convention for time-critical printers.
75 - Which of the following does NOT apply to printing in a high-security environment?
Click on the button next to the right answer.
A. Use a dedicated printer assigned to a specific R/3 application server with an active spool work process.
B. Assign selected users or user groups exclusive access to a printer and allow no authorizations for that printer to other users.
C. Physically secure the printer in a room with controlled access.
D. Modify the rspo/store_location parameter so that print data will be stored in an operating system file rather than in the database.
E. Activate "Delete upon Completion" in the R/3 spool administration to make spool data inaccessible to users through the output controller.
76 - What is the R/3 Workbench Organizer used for?
Click on the button next to the right answer.
A. To send patches from SAP to the customers.
B. To detect and correct errors in the SAP data transfer modules.
C. To record the creation and modification of repository objects.
D. It is only used when upgrading R/3 Systems.
77 - When must the Workbench Organizer be configured?
Click on the button next to the right answer.
A. After all Central and Dialog instance installations.
B. Whenever a new R/3 Central Instance with database is installed.
C. Immediately after a database software version update.
D. After all R/3 release level upgrades but not after correction level upgrades.
78 - Which R/3 facility is used to release a correction/repair?
Click on the button next to the right answer.
A. Workbench Organizer
B. Transaction SE06
C. Development Workbench
D. Customizing Organizer
79 - What is configured in the transport parameter file?
Note: There is more than one right answer! Click on the buttons next to the right answers.
A. The transport parameters for all R/3 central and dialog instances.
B. The database host for each of the systems in the system landscape.
C. The R/3 Dialog Instance startup parameters.
D. The location of the transport directory.
80 - If you repair an SAP object, what will happen if you specify it as a "Local Private Object"?
Click on the button next to the right answer.
A. The repair cannot be transported.
B. The repair may be downloaded to become an object accessible at the native database level.
C. The repair will only be active for the user who creates the repair.
D. The "Local Private Object" option will be used when the repair is transported.
NT
1 - Which combination of the following R/3 Client/Server System components can be installed using the R3INST tool for Windows NT?
Click on the button next to the right answer.
A. Batch Instance, Database Instance, Enqueue Instance, Central Instance, R/3 PC Frontends
B. Central Instance, Dialog Instance, Database Instance
C. Database Instance, Dialog Instance, Message Instance, Central Instance, R/3 PC Frontends
D. R/3 PC Frontends, Database Instance, Update Instance, Central Instance
E. Update Instance, Enqueue Instance, Database Instance, Central Instance, R/3 PC Frontends
2 - All components in this network diagram belong to the same R/3 System group and all R/3 Instance servers communicate with the database installed on DB-1. Systems in LAN 1 and LAN 2 communicate over a wide-area network (WAN).
Which component will generate a significant amount of network traffic and cause network performance problems unless used with a very high capacity data line?
Click on the button next to the right answer.
A. FE-1, Frontend PC in LAN 1.
B. FE-3, Frontend PC in LAN 2.
C. CI-1, Central Instance in LAN 1.
D. DI-1, Dialog Instance in LAN 1.
E. DI-2, Dialog Instance in LAN 2.
3 - The layout and set up of the R/3 System Landscape in terms of R/3 Instance and server distribution, user frontends and printers, and the R/3 network topology...
Which of the following will correctly complete this statement?
Click on the button next to the right answer.
A. is determined by the installer during the installation based upon what he thinks the customer needs.
B. must be discussed and agreed upon with the customer prior to the installation beginning.
C. is not critical because R/3 is always installed the same way.
D. is automatically set up for the most optimal configuration by the R3INST program.
E. is determined by the R/3 salesman. This information is not necessary for the consultant who will be setting up the system.
4 - Which of the following statements applying to R/3 Notes (OSS and CSP Notes) is true?
Click on the button next to the right answer.
A. The R/3 installation notes are available in all languages.
B. Notes used for installations and upgrades are never changed after they are made available in the Online Service System (OSS).
C. The R/3 installation notes are included with every R/3 Release 3.0 software shipment.
D. Notes are internal SAP documents which are never released outside of SAP because they contain too much internal information.
E. Notes sometime contain references to other R/3 notes. These additional notes may also need to be referenced during installations.
5 - When configuring the virtual memory for an R/3 Instance on a Windows NT Server computer with 256 MB on RAM, what are the recommended values for the paging file "Initial Size" and "Maximum Size" parameters?
Click on the button next to the right answer.
A. Initial size = 2 * RAM (minimum 512 MB), Maximum size = 3 * RAM.
B. Initial size = 3 * RAM + 500MB (minimum 1.25 GB), Maximum size = 3 * RAM + 1 GB (maximum 2 GB).
C. Initial size = 2 * RAM + 100 MB per R/3 workprocess (minimum 1.5 GB), Maximum size = 2 * RAM
D. Initial size = 3 * RAM (minimum 1 GB), Maximum size = 3 * RAM (minimum 1 GB).
E. There is no special requirement for R/3 Instances unless the database is installed on the same computer.
6 - The following general statements concern the implementing of RAID technology as part of an R/3 System implementation.
Which statement is true?
Click on the button next to the right answer.
A. All R/3 Instance and database components of an R/3 System should be installed on the same RAID 5 device.
B. When using RAID 1 or RAID 5 the database archiving mechanism may be disabled because the hardware setup guarantees data security.
C. Because RAID 1 supports faster disk writes than RAID 5, it should be used for the R/3 database logs.
D. Because RAID 5 supports faster disk writes than RAID 1, it should be used for the R/3 database logs.
E. A software level RAID implementation is more secure than using a hardware level RAID implementation.
Click on the button next to the right answer.
A. It is a metric that depends on the percentage of the CPU, I/O and LAN resources being utilized.
B. The 1, 5, and 15 minute averages of the count of processes in the run queue of the operating system.
C. The load average value shows the 1, 5, 15 minute averages of the system swapping activity.
D. The load average value shows the 1, 5, 15 minute averages of the operating system uptime.
63 - Which of the following statements describes the average response time as indicated in this Workload Analysis screen?
Click on the button next to the right answer.
A. Average response time is equal to or less than the sum of CPU time, plus wait time, plus load time, plus database request time.
B. Average response time is equal to or less than the CPU time.
C. Average response time is equal to the sum of CPU time, plus wait time, plus load time, plus database request time, plus time in the frontend process.
64 - Based upon the information in the indicated area of the Workload Analysis screen, which of the following statements is true about Average Wait Time?
Click on the button next to the right answer.
A. Average Wait Time is normally 80% of the average response time.
B. Average Wait Time is normally 50% of the average response time.
C. Average Wait Time is normally less than 5% of the average response time.
65 - This Workload Analysis screen shows an example of poor response time caused from a high average wait time. Which of the following statements explains why the average wait time could be so high?
Click on the button next to the right answer.
A. R/3 programs are waiting a long time to get free workprocesses because system resources are limited.
B. R/3 programs are staying a long time inside of workprocesses because they are waiting for internal R/3 System events.
C. R/3 programs are waiting a long time to get free workprocesses because the R/3 programs are running with low priorities.
66 - Based upon the information indicated in area 1 and 2 of this Operating System Monitor screen, which of the following is true?
Click on the button next to the right answer.
A. System CPU resources are not sufficient. A wait situation is possible when many processes are requesting CPU resources.
B. CPU resources are adequate. No performance problems will be encountered.
C. CPU resources are adequate, but performance problems will be encountered because of wait situations sharing the resources.
67 - Based upon the information in areas 1 - 3 of this R/3 System Monitoring screen, which of the following statements is true?
Click on the button next to the right answer.
A. The "load" program consumes much of the available CPU resources.
B. The "load" program consumes much of the available I/O resources.
C. The "load" program cannot be considered a performance degradation factor.
68 - This performance Analysis screen shows a case of excessive object swapping even though there is apparently enough free space in the Program Buffer.
Based upon the information indicated, which of the following statements explains why there is so much swapping?
Click on the button next to the right answer.
A. The indication of object swapping is false and does not express the current situation.
B. There is enough free space but not enough directory entries.
C. The available free space is fragmented and the fragments are not big enough to hold the new programs.
69 - Which of the following is NOT true of the SAProuter?
Click on the button next to the right answer.
A. The SAProuter is an application level gateway.
B. The SAProuter acts as a secure gateway into and out of a customer's SAP environment.
C. SAProuter will only accept incoming data if it conforms to SAP's own internal protocol and if it is coming in over a predefined port number from a predefined internet address.
D. SAProuter installation is mandatory for connection to the SAP Online Service System (OSS).
E. SAProuter installation is not mandatory for connection to the SAP Online Service System (OSS).
70 - For complete network security, SAProuter must be installed together with:
Click on the button next to the right answer.
A. Microsoft Windows NT
B. UNIX
C. A hardware router.
D. SAProuter offers complete network security without additional hardware investment.
E. A Worldwide Web implementation strategy.
71 - Name the R/3 System transaction used for printing and spool administration.
Click on the button next to the right answer.
A. SM50
B. SM51
C. SPAD
D. SP01
E. SM37
72 - Printing in the R/3 System is handled by the TemSe (storage for Temporary Sequential data) and spool components. Which of the following is NOT true:
Click on the button next to the right answer.
A. The TemSe only stores the output request data.
B. The instance parameter, rspo/store_location, determines whether TemSe data is stored in the database or in an operating system file.
C. TemSe data stored in an operating system file must be backed-up separately from the database data.
D. TemSe data stored in the database can be accessed faster by the host operating system spooler than when it is stored in a file.
E. TemSe data stored in the database is backed-up when regular database backups are done.
73 - Which of the R/3 spool device authorization templates schould be used for creating an authorization profile with a defined set of spool output devices?
Click on the button next to the right answer.
A. S_SPO_DEV_CUST
B. S_SCRP_TALL
C. S_SPO_DEV_AL
D. S_SPO_ACT
E. S_SPO_ALL
74 - Which of the following does NOT apply to time-critical printing?
Click on the button next to the right answer.
A. Use dedicated application servers with their own spool work process.
B. Print as much as possible over a remote connection.
C. Limit device authorization for critical printer to selected users.
D. Implement high availability practices for the host spool system.
E. Use an appropriate naming convention for time-critical printers.
75 - Which of the following does NOT apply to printing in a high-security environment?
Click on the button next to the right answer.
A. Use a dedicated printer assigned to a specific R/3 application server with an active spool work process.
B. Assign selected users or user groups exclusive access to a printer and allow no authorizations for that printer to other users.
C. Physically secure the printer in a room with controlled access.
D. Modify the rspo/store_location parameter so that print data will be stored in an operating system file rather than in the database.
E. Activate "Delete upon Completion" in the R/3 spool administration to make spool data inaccessible to users through the output controller.
76 - What is the R/3 Workbench Organizer used for?
Click on the button next to the right answer.
A. To send patches from SAP to the customers.
B. To detect and correct errors in the SAP data transfer modules.
C. To record the creation and modification of repository objects.
D. It is only used when upgrading R/3 Systems.
77 - When must the Workbench Organizer be configured?
Click on the button next to the right answer.
A. After all Central and Dialog instance installations.
B. Whenever a new R/3 Central Instance with database is installed.
C. Immediately after a database software version update.
D. After all R/3 release level upgrades but not after correction level upgrades.
78 - Which R/3 facility is used to release a correction/repair?
Click on the button next to the right answer.
A. Workbench Organizer
B. Transaction SE06
C. Development Workbench
D. Customizing Organizer
79 - What is configured in the transport parameter file?
Note: There is more than one right answer! Click on the buttons next to the right answers.
A. The transport parameters for all R/3 central and dialog instances.
B. The database host for each of the systems in the system landscape.
C. The R/3 Dialog Instance startup parameters.
D. The location of the transport directory.
80 - If you repair an SAP object, what will happen if you specify it as a "Local Private Object"?
Click on the button next to the right answer.
A. The repair cannot be transported.
B. The repair may be downloaded to become an object accessible at the native database level.
C. The repair will only be active for the user who creates the repair.
D. The "Local Private Object" option will be used when the repair is transported.
NT
1 - Which combination of the following R/3 Client/Server System components can be installed using the R3INST tool for Windows NT?
Click on the button next to the right answer.
A. Batch Instance, Database Instance, Enqueue Instance, Central Instance, R/3 PC Frontends
B. Central Instance, Dialog Instance, Database Instance
C. Database Instance, Dialog Instance, Message Instance, Central Instance, R/3 PC Frontends
D. R/3 PC Frontends, Database Instance, Update Instance, Central Instance
E. Update Instance, Enqueue Instance, Database Instance, Central Instance, R/3 PC Frontends
2 - All components in this network diagram belong to the same R/3 System group and all R/3 Instance servers communicate with the database installed on DB-1. Systems in LAN 1 and LAN 2 communicate over a wide-area network (WAN).
Which component will generate a significant amount of network traffic and cause network performance problems unless used with a very high capacity data line?
Click on the button next to the right answer.
A. FE-1, Frontend PC in LAN 1.
B. FE-3, Frontend PC in LAN 2.
C. CI-1, Central Instance in LAN 1.
D. DI-1, Dialog Instance in LAN 1.
E. DI-2, Dialog Instance in LAN 2.
3 - The layout and set up of the R/3 System Landscape in terms of R/3 Instance and server distribution, user frontends and printers, and the R/3 network topology...
Which of the following will correctly complete this statement?
Click on the button next to the right answer.
A. is determined by the installer during the installation based upon what he thinks the customer needs.
B. must be discussed and agreed upon with the customer prior to the installation beginning.
C. is not critical because R/3 is always installed the same way.
D. is automatically set up for the most optimal configuration by the R3INST program.
E. is determined by the R/3 salesman. This information is not necessary for the consultant who will be setting up the system.
4 - Which of the following statements applying to R/3 Notes (OSS and CSP Notes) is true?
Click on the button next to the right answer.
A. The R/3 installation notes are available in all languages.
B. Notes used for installations and upgrades are never changed after they are made available in the Online Service System (OSS).
C. The R/3 installation notes are included with every R/3 Release 3.0 software shipment.
D. Notes are internal SAP documents which are never released outside of SAP because they contain too much internal information.
E. Notes sometime contain references to other R/3 notes. These additional notes may also need to be referenced during installations.
5 - When configuring the virtual memory for an R/3 Instance on a Windows NT Server computer with 256 MB on RAM, what are the recommended values for the paging file "Initial Size" and "Maximum Size" parameters?
Click on the button next to the right answer.
A. Initial size = 2 * RAM (minimum 512 MB), Maximum size = 3 * RAM.
B. Initial size = 3 * RAM + 500MB (minimum 1.25 GB), Maximum size = 3 * RAM + 1 GB (maximum 2 GB).
C. Initial size = 2 * RAM + 100 MB per R/3 workprocess (minimum 1.5 GB), Maximum size = 2 * RAM
D. Initial size = 3 * RAM (minimum 1 GB), Maximum size = 3 * RAM (minimum 1 GB).
E. There is no special requirement for R/3 Instances unless the database is installed on the same computer.
6 - The following general statements concern the implementing of RAID technology as part of an R/3 System implementation.
Which statement is true?
Click on the button next to the right answer.
A. All R/3 Instance and database components of an R/3 System should be installed on the same RAID 5 device.
B. When using RAID 1 or RAID 5 the database archiving mechanism may be disabled because the hardware setup guarantees data security.
C. Because RAID 1 supports faster disk writes than RAID 5, it should be used for the R/3 database logs.
D. Because RAID 5 supports faster disk writes than RAID 1, it should be used for the R/3 database logs.
E. A software level RAID implementation is more secure than using a hardware level RAID implementation.
